more Chevy parts

fresh set of 191 vortec swirl port heads redone never installed 400.00 firm
nice set of 993 rigged for racing heavy duty springs about 100 laps 200.00 obo
both sets are 1.94x1.50 w/ 76 cc chambers
2 holley 4412 carbs with spacers 1 aluminum 1 poly 100.00ea obo
Slightly used perfect condition isky flat tappet cam with lifers in order 390 lift 106 lc 276 int./280 exh. 2,400-6,800 and yes i have cam card 80.00
7960 comp cams slightly used push rods 7.650x.080 perfectly straight 40.00
short set chrome vortec valve covers 15.00
tall standard valve covers 15.00
1 two bolt 350 solid block needs machining. scrap $$
2 cast cranks scrap $$
454 4 bolt 30,000 miles runs perfect can hear run 1000.00 obo
wining a race with second hand used parts Priceless

all parts listed above are for 350 sbc
thanks for your time
Matthew

I’ll take the 2 4412 carbs, the cam and the pushrods, and I would pay $150 for the 883 heads. Where are u located?

North Port Sarasota area call 941-883-1602 thank you

I never heard back from you.

yesturday got fairly busy for me sorry! i couldnt get a hold of any one that i knew in the area and it is quit a distance for me to drive to get to ya i am still looking into the cost of getting them over 2 ya i will keep you updated thank you

Ok, let me know, thanks!

to expensive to ship and closest i can get to st augustine is new port richie this weekend let me know if you are still interested thank you call w/ any questions 941-883-1602

I can’t get over there. Can you just ship the carbs, and I will pay the shipping?

let me get your e-mail address to send photos to make sure you want them they both need to be rebuilt but i am sure you already know that which is why they are cheap

Email is: sunnfun6066@aol.com

never heard back still interested???

Are the heads assembled or bare?

performance springs stainless retainers does not have rockers

Email sent

fresh set of 191 vortec swirl port heads redone never installed 400.00 firm
nice set of 883 rigged for racing heavy duty springs about 100 laps 200.00 obo
both sets are 1.94x1.50 w/ 76 cc chambers
2 Holley 4412 carbs with spacers 1 aluminum 1 poly 100.00ea obo
Slightly used perfect condition Isky flat tappet cam with lifers in order 390 lift 106 lc 276 int./280 exh. 2,400-6,800 and yes I have cam card 80.00
7960 comp cams slightly used push rods 7.650x.080 perfectly straight 40.00
short set chrome vortec valve covers 15.00
tall standard valve covers 15.00
1 two bolt 350 solid block 010 casting needs machining. scrap $$
2 cast cranks scrap $$
454 4 bolt 30,000 miles runs perfect can hear run 1000.00 obo
Every thing posted still for sale taking it all to Swap Meet Sunday morning let me know before i go

all parts listed above are for 350 sbc
thanks for your time
Matthew