Two 15x8 rims one is 4 in backspacing and the other in a 2 in backspacing $20 a rim
comp cams 500 lift 2200-6500 303 dur 108lc $40
crane cam 500 lift 2000-6500 292 dur 106lc $40
isky 525 soild lift cam and crane soild lifters 3000-6800 525 lift 296 duration 106lc $100
I have a set of 882 head cut to 72cc 194 160 vavles 550 comp vavle springs honed out alittle and re shotpeened at machine shop $ 200 ready to bolt on
I got a three cast iron 4 barrel intake ill take 15 each or 30 for all 3.
i got one alum stock 4 barrel intake ill sell for 25
I got a two barrel intake ill take 30 for
16 gallon fuel cell with foam and pick up 2’ square tubing frame $40
Set of upper motor mounts $10
big sway bar 2inoff a big monte super stock $20
one flex fan $10
chrome tall vavle covers new with chrome aircleaner $30
7.5 rearend with a 3.90 gear with locker alum drums all new bearing and seals new lock with richmond gear hawk pads new brake lines and bigger studs $350
also i got a nice set needs one vavle i took it out cause i over tightin the rocker and mushshomed the top of the vavle but other then that they are bad ass 4 angle valve job 600lift valve spring cut to 62cc they got screw in studs and guide plates 350 obo
what is the measurement between bolt holes…center to center?
[QUOTE=racing22;66538]Two 15x8 rims one is 4 in backspacing and the other in a 2 in backspacing $20 a rim
comp cams 500 lift 2200-6500 303 dur 108lc $40
crane cam 500 lift 2000-6500 292 dur 106lc $40
isky 525 soild lift cam and crane soild lifters 3000-6800 525 lift 296 duration 106lc $100
I have a set of 882 head cut to 72cc 194 160 vavles 550 comp vavle springs honed out alittle and re shotpeened at machine shop $ 200 ready to bolt on
I got a three cast iron 4 barrel intake ill take 15 each or 30 for all 3.
i got one alum stock 4 barrel intake ill sell for 25
I got a two barrel intake ill take 30 for
16 gallon fuel cell with foam and pick up 2’ square tubing frame $40
Set of upper motor mounts $10
big sway bar 2inoff a big monte super stock $20
one flex fan $10
chrome tall vavle covers new with chrome aircleaner $30
7.5 rearend with a 3.90 gear with locker alum drums all new bearing and seals new lock with richmond gear hawk pads new brake lines and bigger studs $350[/QUOTE]
i thought you sold them heads? i have a turbo 350 to trade
yeah i had a built motor the guy wanted and i took them in on trade
Two 15x8 rims one is 4 in backspacing and the other in a 2 in backspacing $20 a rim
comp cams 500 lift 2200-6500 303 dur 108lc $40
crane cam 500 lift 2000-6500 292 dur 106lc $40
isky 525 soild lift cam and crane soild lifters 3000-6800 525 lift 296 duration 106lc $100
I have a set of 882 head cut to 72cc 194 160 vavles 550 comp vavle springs honed out alittle and re shotpeened at machine shop $ 200 ready to bolt on
I got a three cast iron 4 barrel intake ill take 15 each or 30 for all 3.
i got one alum stock 4 barrel intake ill sell for 25
I got a two barrel intake ill take 30 for
16 gallon fuel cell with foam and pick up 2’ square tubing frame $40
Set of upper motor mounts $10
big sway bar 2inoff a big monte super stock $20
one flex fan $10
chrome tall vavle covers new with chrome aircleaner $30
7.5 rearend with a 3.90 gear with locker alum drums all new bearing and seals new lock with richmond gear hawk pads new brake lines and bigger studs $350
i got a nice set needs one vavle i took it out cause i over tightin the rocker and mushshomed the top of the vavle but other then that they are bad ass 4 angle valve job 600lift valve spring cut to 62cc they got screw in studs and guide plates 350 obo
let make a deal trade parts or parts and cash. Things im looking for is a good 350 block good crank and rods no stock stuff must be after market flat top pistons 30 or 40 over . Racing vavle covers. Nice 4412carb
make offers the heads are firm
whats the length on the rearend hub to hub? is the rearend centered not offset? is it setup for coil springs or leaf?
its centered and set up for coil springs its in a metric monte super stock right now
Where are you located and I assume the bolt pattern is 4 & 3/4. Are you available this weekend?
sorry 3.90 rear sold i got a compelte welded 3.42 rearend its centered not off set set up for coil springs its a 7.5 10 bolt $200
what brakes are on that rearend? same bolt pattern? putting this in a rat rod so the 3.42 is fine for the street
not sure on the brake pads i know they got alot of life on them and yes it 5x4.75 standard metric bolt pattern