All are parts are used but in good working condition.
I don’t need and can’t use the parts. Make fair offer and its yours.
The rear end is basically new.
10 Bolt 8.5" (3 races)
3 spd saginaw
drive shaft
two 4412 carbs
HEI dis. sbc
double hump heads (new springs in box)
555 cam and matching lifters
540 cam and matching lifters
performer intake
stock cast intake
have a few 8" wheels 5x5 and four 10" 5x5
interested in the 10 bolt. Contact info??? maybe the heads
parts
Andy, check your pm’s.
How much for the 3 speed trans
PM’s replied to.
Randy, my cell is 239-246-3000.
Saginaw
Whats the gearing in the tranny? Where are you located? Thanks
how much for a carb and what were they ran on
The trans are 1.68 and i think the other is 1.89.
The carbs were on sportsman cars.
Located in Ft Myers/Naples
Stock Cast Intake Sold
some more pics.
I have two intakes. One is a performer the other is an rpm.
The wheels are:
(2) 2" BS
(2) 4" BS
(1) 2" BS with damage
(1) 4" BS with damage
(1) 2" BS Crome
Crome wheel sold.
$500 10 Bolt 8.5" (3 races)
$100 3 spd saginaw
$25 drive shaft
$50 4412 carb
$50 4412 carb
$50 HEI dis. sbc
$200 double hump heads (new springs in box)
$50 555 cam and matching lifters
$50 540 cam and matching lifters
$50 performer intake
$50 performer rpm intake
$10 each /have 8" wheels 5x5 and four 10" 5x5
What is the length on the drive shaft?
Over all drive shaft length is 52 1/2". The shaft that slides into the tranny is 3 3/4".
Three races on new yoke.
ALL WHEELS ARE SOLD.
Distributor and one carb SOLD
To the top.
