Looking for complete 355 sbc

Looking for complete 355 sbc motor. Possibly running street stock or sportsman with it. I have cash and not looking to do any trades.

How much u looking to spend I can build u one


I have a fresh rebuilt 355, 010 block, scat steel crank & rods, LT WT Ross flattop pistons, 450 lift hydralic cam, new 2101 performer intake, new 500 2bl Holley, 041 heads w/roller rockers, screw in studs, w/stud girdle, HEI distributor, complete from pan to karb, never been fired, was built as a street stock engine, short block was in our SLM from Ziegler racing engines, run 8,000 rpm all day long, $4,500. call Mike mon-fri 9-5 at 239-597-2908 or evenings and weekends 239-248-8337

Wow 8000 rpm with 1.250 springs and a 450 cam. AWESOME, but should have floated valves at 6200. Make sure your msd box is not setup for a v-6. Hey though it was never fired. LOL THIS SIGHT HAS MANY PROFESSIONAL BS ARTIST’S. Why lie?

to the top

to the top

I have a sportsman turnkey with fresh zero laps 355 motor for sale 386-804-0157

Ss Motor

I have a 355 2 bolt main scat crank and rods silvolite 2eyebrows,505 isky cam dblhmp 202 heads screw ins guide plates poly locks,been decked original 64cc has gm cast intake aluminum water pump undrove pulleys
7 quart oil pan I will take 2000 for it

flipflopchop-Interested… please leave contact #.

386 299 7886 Chris

did yo find a motor if not il build you one similar to fliplops for 2100

i have new 355

4200.00 ihave a willys2barrel and willys spacer 500.00 ph 727-934-6942