5/16 (or 3/8) Fuel Bulkhead Fitting??

Fellow Karnacians, am hoping someone can hep me out.

Am fabricating (cobbling?) my own in tank fuel pump setup for my street car, utilyzing my existing fuel pickup.

I need a 5/16 or 3/8 fitting (that is, to slide a 5/16 or 3/8 rubber fuel hose onto) to use for a return.

Any other solutions than the ATL TF602 bulkhead fitting?

That is, maybe more compact, maybe brass or stainless, maybe cheaper?

Thank you in advance for your thoughts.