Can someone help with the final gear ratios for the mini-stocks/mini-mods for the following tracks. any information will be greatly appreciated Thank you.
East Bay park
Ocala speedway
Volusia county speedway
New Hendry county speedway
:auto003:
Can someone help with the final gear ratios for the mini-stocks/mini-mods for the following tracks. any information will be greatly appreciated Thank you.
East Bay park
Ocala speedway
Volusia county speedway
New Hendry county speedway
:auto003:
depending on motor volusia 600 to 630@8000 rpm plus
[QUOTE=Rainman;7415]Can someone help with the final gear ratios for the mini-stocks/mini-mods for the following tracks. any information will be greatly appreciated Thank you.
East Bay park
Ocala speedway
Volusia county speedway
New Hendry county speedway
:auto003:[/QUOTE]
All look to be dirt, correct?
Running a quick change?
What is your engine rpm power band?
Transmission?
I know lots of questions BUT this is why
I run a 7:77 on a 1/3 mile dirt oval turning about 7,200
we would run a 5:80, 5/8 mile or LONG 1/2 mile
East bay was a 6:60
We run a Hutter Small block in a 1650# car.
I would take the LOW SIDE to get a reading. I would TRY a 6:60 to 6:25 at Ocala and go from there.
Some of these ratio’s are off the wall but we have gear sets made up to get those.:ernaehrung004: